Main Picture
3M™ Finesse-it™ Advanced Foam Buffing Pad, 45227, Gray, 95 mm (3-3/4 in), Convolute, 10/Carton, 100 ea/Case
3M™ Finesse-it™ Advanced Foam Buffing Pad, 45227, Gray, 95 mm (3-3/4 in), Convolute, 10/Carton, 100 ea/Case
3M ID 7100321961 SAP ID 7100321961 Legacy SKU UU012518716 Part Number 45227 Local Catalog Identifier 75227 Base SKU B40067393 Keywords 3M, 3M Finesse-it, advanced foam buffing pad, foam buffing pad, buffing pad, high gloss finish, satin finish, semi-gloss finish, automotive paint, marine coatings, aerospace coatings, wood finishing, heat buildup reduction, swirl marks elimination, extra fine finish, clearcoat finishing, rework reduction, 3M Hookit attachment system, tool versatility, random orbital tools, variable speed polishers, flat face, convolute face, abrasive sand scratches, paint repair system, heat resistant, chemical composition, evolving paint technologies, wool pads, closed cell pads, polishes, OEM coatings, cured refinish coatings, surface defects repair, gelcoat removal, lacquered wood repair, industrial paint, commercial vehicles, personal recreational vehicles, two wheel vehicles. Brand Finesse-it™ Global Product Hierarchy Bonnets & Buffing Pads Commodity 6080 - Abr. Systems Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 04064035183219 Unit of Use (1) - Article Number 04064035183219 Consumer (2) - Article Number 04064035134167 Shipper (6) - Article Number 04064035134174 Pallet (8) - Article Number 04064035134181 Marketplace Formal Name 3M™ Finesse-it™ Advanced Foam Buffing Pad, 45227, Gray, 95 mm (3-3/4 in), Convolute, 10/Carton, 100 ea/Case Material Description 45227 FIN AFBP 95mm(3-3/4) CONV 10/100PD Marketplace Description 3M™ Finesse-it™ Advanced Foam Buffing Pads are available with a convolute or flat shape for use with our specially developed 3M™ Finesse-it™ polishes to achieve satin, semi-gloss or high gloss finishes on Advanced coatings in automotive, marine, aerospace and wood. Marketplace Description Extended High Quality Finishing The 3M™ Finesse-it™ Advanced Foam Buffing Pads remove the abrasive sand scratches that were created to remove small defects in automotive clear coats. You can also use this buffing pad in the 3M™ Finesse-it&trade Paint Repair System for AOEM paint and clear coats whenever the finest finish is required. The Advanced foam reduces heat buildup during buffing and helps eliminates swirl marks. These pads are manufactured with our hook and loop attachment system for quick pad attachment and removal and to hold the pad securely in place during use. These Advanced buffing pads conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the pad. Finish results are dependent on the combination of coating type, polish, and tools used. Heat Resistant We developed our line of foam pads to address the unique chemical composition of evolving paint and clear coat technologies. Foam pads are generally less aggressive and produce a finer finish than wool pads. They normally operate at higher RPMs than wool pads also, relying on a combination of cutting and speed to remove fine scratches, swirl marks, and surface marring. Foam pads range in abrasive levels determined by its softness and the cell size of the holes; the larger the hole, the more aggressive the pad. "Closed cell" pads are the least aggressive type. Foam buffing pads are used in conjunction with polishes and are recommended for use with random orbital tools. Finesse-it™ Buffing System Our line of 3M™ Finesse-it™ products are specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and fully cured refinish coatings to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. Finesse-it™ products are an integral part of our recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass. Bullets - CHOOSE YOUR PAD: Available with flat or convolute faces in a number of densities, with each providing varying level of aggression
- EXTRA FINE FINISH: Ideal for final and extra finish finishing steps on clearcoat
- HEAT BUILDUP REDUCTION: Reduces heat buildup during buffing and helps eliminate swirl marks
- QUICK AND EASY PAD CHANGES: The 3M™ Hookit™ Attachment System allows for easy pad changes and helps optimize tool uptime
- REDUCES REWORK: Repairs coatings without repainting
- TOOL VERSATILITY: Pads combine with buffers, random orbital tools, and variable speed polishers
Abrasive Material Non Pertinent Application - Paint Finish Solution
- Paint Finishing & Detailing
- Gloss restoration
- High cut rate
- Machine application
- Oxidation Removal
- Repairing Large Area Paint Defects
- Repairing Small Area Paint Defects
- Repairing Small Area Defects
- Paint Defect Removal
- Scratch Removal
- Cured Paint
- Fresh Paint Finishes
- Hardest Paint Finishes
- Sand Scratch Removal
- Refining Scratches
- Buffing & Polishing
- Paint
- Compounding
- Finishing
- Fine Finishing
- Polishing
Attachment Type Hook & Loop Face Style Waffle Material Foam Overall Diameter (Imperial) 3.75 in Overall Diameter (Metric) 95 mm Product Color Gray Shape Round Sub Applications - Scratch Refinement
- Detailing
Sales unit EA SAP Shelf Life In Days 1825 Target Warehouse Location Lead Time 2 days SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 17.38756 IN3 Base (B) - Customary Gross Weight 0.02388 LB Base (B) - Customary Net Weight 0.01499 LB Base (B) - Metric Net Weight 0.0068 KG Base (B) - Metric Cubic Dimension 284.93 CCM Base (B) - Previous Packaging Level Quantity 0.00 Base (B) - Item Quantity 1 Base (B) - Total Unit Quantity 0.00 Base (B) - Unit EA Base (B) - Pallet Layer Quantity 4.00 Base (B) - Shipping Container Per Layer Quantity 6 Consumer (2) - Billing Unit EA Consumer (2) - Customary Cubic Dimension 148.0321 IN3 Consumer (2) - Customary Gross Weight 0.16758 LB Consumer (2) - Customary Net Weight 0.14994 LB Consumer (2) - Customary Height Dimension 4 IN Consumer (2) - Customary Length Dimension 9.25197 IN Consumer (2) - Customary Width Dimension 4 IN Consumer (2) - Metric Weight 0.076 KG Consumer (2) - Metric Net Weight 0.068 KG Consumer (2) - Metric Cubic Dimension 2425.802 CCM Consumer (2) - Metric Height Dimension 10.16 CM Consumer (2) - Metric Length Dimension 23.5 CM Consumer (2) - Metric Width Dimension 10.16 CM Consumer (2) - Item Quantity 10 Consumer (2) - Unit KAR Inner (3) - Item Quantity 0 Shipper (6) - Billing Unit EA Shipper (6) - Customary Cubic Dimension 1738.75847 IN3 Shipper (6) - Customary Gross Weight 2.38802 LB Shipper (6) - Customary Net Weight 1.4994 LB Shipper (6) - Customary Height Dimension 8.12598 IN Shipper (6) - Customary Length Dimension 20.62598 IN Shipper (6) - Customary Width Dimension 10.37402 IN Shipper (6) - Metric Weight 1.083 KG Shipper (6) - Metric Net Weight 0.68 KG Shipper (6) - Metric Cubic Dimension 28493.035 CCM Shipper (6) - Metric Height Dimension 20.64 CM Shipper (6) - Metric Length Dimension 52.39 CM Shipper (6) - Metric Width Dimension 26.35 CM Shipper (6) - Previous Packaging Level Quantity 100.00 Shipper (6) - Item Quantity 100 Shipper (6) - Total Unit Quantity 100.00 Shipper (6) - Unit CS Pallet (8) - Billing Unit EA Pallet (8) - Customary Cubic Dimension 93000.54922 IN3 Pallet (8) - Customary Gross Weight 111.24446 LB Pallet (8) - Customary Net Weight 35.9856 LB Pallet (8) - Customary Height Dimension 40.47244 IN Pallet (8) - Customary Length Dimension 47.24409 IN Pallet (8) - Customary Width Dimension 31.49606 IN Pallet (8) - Metric Weight 50.451 KG Pallet (8) - Metric Net Weight 16.32 KG Pallet (8) - Metric Cubic Dimension 1524000.0 CCM Pallet (8) - Metric Height Dimension 102.8 CM Pallet (8) - Metric Length Dimension 120.0 CM Pallet (8) - Metric Width Dimension 80.0 CM Pallet (8) - Previous Packaging Level Quantity 0.00 Pallet (8) - Previous Packaging Level Unit BOX Pallet (8) - Item Quantity 2400 Pallet (8) - Total Unit Quantity 2400.00 Pallet (8) - Unit PAL Pallet (8) - Pallet Layer Quantity 4.00 Pallet (8) - Shipping Container Per Layer Quantity 6