Main Picture
Scotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 8 in x 1/2 in
Scotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 8 in x 1/2 in
3M ID 7100338822 SAP ID 7100338822 Legacy SKU UU013159015 Product Number XO-DC Base SKU B5005028017 Keywords 3M, Scotch-Brite, Clean and Strip XT Pro Disc, abrasive disc, silicon carbide, nylon web, rust removal, paint removal, mill scale removal, coating removal, adhesive removal, surface preparation, industrial maintenance, transportation, manufacturing, high conformability, low vibration, long life, sharp abrasive grain, consistent cutting, high-speed rating, non-woven nylon fibers, resin bond, fine finish, workpiece edges, low spark, increased productivity, angle grinder, re-engineered fiber, metal cleaning, weld polishing. Brand Scotch-Brite™ Global Product Hierarchy Non-woven Discs Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00638060638934 Marketplace Formal Name Scotch-Brite™ Clean and Strip XT Pro Disc, XO-DC, SiC Extra Coarse, Purple, 8 in x 1/2 in Material Description XO-DC S XCRS 8 x 1/2in DC Marketplace Description Scotch-Brite™ Clean and Strip XT Pro Disc features silicon carbide abrasive mineral incorporated into an open nylon web. It effectively removes rust, paint, mill scale, coatings and adhesives from surfaces without significantly altering the base material. The high-strength fibers are highly conformable, resist chunking and loading, and perform well on the edges of a workpiece. Marketplace Description Extended Take Advantage of High Conformability. With its re-engineered fiber, the Scotch-Brite™ Clean and Strip XT Pro Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them and works in hard-to-reach areas without damaging the substrate. In addition to its high conformability, the Scotch-Brite™ Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence. To engineer our Scotch-Brite™ Clean and Strip XT Pro Disc, silicon carbide mineral is combined with non-woven nylon fibers using resin. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive. The combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, minimizing loading of the abrasive. Applications include rust removal, paint removal, mill scale removal, coating removal, adhesive removal, and surface preparation. Bullets - CONFORMABLE: High conformability provides a larger contact patch for faster removal rates, enhancing productivity
- CONSISTENT CUT OVER TIME: Open nylon web resists loading for consistent cutting action
- PERFORMANCE WITHOUT COMPROMISE: Higher cut rate, longer life, low vibration and low spark
- RE-ENGINEERED FIBER: High strength fiber resists chunking and performs well on edges
- RECOMMENDED APPLICATIONS: Cleaning, finishing, surface preparation, rust removal, light scale removal and coating removal
- SHARP ABRASIVE GRAIN: Silicon carbide mineral cuts aggressively and leaves a fine finish
- WORKS EFFICIENTLY AND FAST: Quickly removes rust, paint, light mill scale and coatings from metal
Abrasive Material Silicon Carbide Application - Corrosion Removal
- Weld Preparation
- Surface Preparation for Painting
- Paint Removal
- Stripping
- Strip Paint to Metal
- Weld discolouration removal (stainless steel)
- Surface Preparation
- Sealant Removal
- Descaling
- Paint Stripping
- Mill Scale Removal
- Coating Removal
- Rust Removal
- Paint Preparation
- Oxide Removal
Attachment Type Center Hole Backing Material Non-woven Center Hole Diameter (Imperial) 0.5 in Center Hole Diameter (Metric) 12.7 mm Density 0.0 Grade Extra Coarse Grit Non Pertinent Overall Diameter (Imperial) 8 in Overall Diameter (Metric) 203.2 mm Product Color Purple Product Form Disc Sub Applications - Light Coating Removal
- Paint Removal
- Strip Paint to Metal
- Sealant Removal
- Descaling
- Paint Stripping
- Prepping Metal Prior to Paint
- Pre-Paint Scuffing
- Weld Cleaning
- Coating Removal
- Rust Removal
- Paint Preparation
Substrate - Oxide
- Stainless Steel
- Aluminum
- Paint
- Sealer
- Carbon Steel
- Soft Rubber
Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 10 SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 41.58351 IN3 Base (B) - Customary Gross Weight 356.40738 LB Base (B) - Customary Net Weight 356.40738 LB Base (B) - Metric Net Weight 161.636 KG Base (B) - Metric Cubic Dimension 681.429 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Item Quantity 0 Pallet (8) - Item Quantity 0