Main Picture
Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc, XC-DC, A/O Extra Coarse, Green, 12 in x 7/8 in
Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc, XC-DC, A/O Extra Coarse, Green, 12 in x 7/8 in
3M ID 7100342895 SAP ID 7100342895 Legacy SKU UU013201726 Product Number XC-DC Base SKU B5005028018 Keywords 3M, Scotch-Brite, Clean and Strip XT Pro Extra Cut Disc, aluminum oxide abrasive, rust removal, paint removal, corrosion removal, weld cleaning, high conformability, high-strength fibers, nylon web, industrial maintenance, manufacturing, aggressive mineral, weld cleanup, nonwoven fibers, consistent cutting, angle grinder disc, surface preparation, metal cleaning, abrasive disc. Brand Scotch-Brite™ Global Product Hierarchy Non-woven Discs Commodity 1150 - Surface Conditioning Prod Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00638060639948 Marketplace Formal Name Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc, XC-DC, A/O Extra Coarse, Green, 12 in x 7/8 in Material Description XC-DC A XCRS 12 x 7/8in DC Marketplace Description Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc features aluminum oxide abrasive mineral incorporated into an open nylon web. It is designed to remove heavy rust, thick paint and corrosion while also scratching the base material underneath, which can save you time. The highly conformable, high-strength fibers resist chunking and loading, and they perform well on edges. Marketplace Description Extended Take Advantage of High Conformability. With its re-engineered fiber web, the Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them and works in hard-to-reach areas without damaging the substrate. In addition to its high conformability, the Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc offers low vibration, decreased chunking, a high-speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence. Save Time with Aluminum Oxide. We designed our Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc with aluminum oxide abrasive mineral because of its ability to remove heavy coatings and simultaneously scratch and clean to the bare metal underneath without leaving divots. This means that operators can remove a coating from a workpiece and get it ready for welding or adhesive application with the same disc – saving the time of switching abrasives. Spongy Web, Sharp Mineral. To engineer our Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc, aluminum oxide mineral is combined with nonwoven nylon fibers using resin. Aluminum oxide is a very hard mineral that delivers a high cut rate, commonly used in high-pressure applications like cutting and weld removal. The resin bond strengthens the fiber web and allows it to gradually break down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive. The combination of fiber strands, resin and abrasive mineral forms a thick, open web. Gaps in the web allow swarf to escape, minimizing loading of the abrasive. Applications include removing heavy rust, removing rust pits, removing thick paint, removing corrosion, removing weld discoloration, and weld cleanup Bullets - AGGRESSIVE MINERAL PERFORMANCE: Aluminum oxide mineral aggressively removes top layer and refines to the bare metal underneath
- CONSISTENT CUT OVER TIME: Open nylon web resists loading for consistent cutting action
- HIGH CONFORMABILITY: Provides a larger contact patch, enabling faster removal rates
- HIGH-STRENGTH FIBER: Resists chunking and performs exceptionally well on edges
- QUICK REMOVAL: Efficiently removes heavy rust, thick paint, corrosion and cleans welds while providing fast and effective removal
Abrasive Material Aluminum Oxide Application - Corrosion Removal
- Weld Preparation
- Surface Preparation for Painting
- Paint Removal
- Stripping
- Strip Paint to Metal
- Weld discolouration removal (stainless steel)
- Surface Preparation
- Sealant Removal
- Paint Stripping
- Coating Removal
- Rust Removal
- Paint Preparation
- Oxide Removal
Attachment Type Center Hole Backing Material Non-woven Center Hole Diameter (Imperial) 0.875 in Center Hole Diameter (Metric) 22.225 mm Density 0.0 Grade Extra Coarse Grit Non Pertinent Overall Diameter (Imperial) 12 in Overall Diameter (Metric) 304.8 mm Product Color Green Product Form Disc Sub Applications - Light Coating Removal
- Paint Removal
- Strip Paint to Metal
- Sealant Removal
- Paint Stripping
- Prepping Metal Prior to Paint
- Pre-Paint Scuffing
- Weld Cleaning
- Coating Removal
- Rust Removal
- Paint Preparation
Substrate - Oxide
- Stainless Steel
- Aluminum
- Paint
- Sealer
- Carbon Steel
- Soft Rubber
Sales unit EA SAP Shelf Life In Days 3650 Target Warehouse Location Lead Time 10 SAP External Material Group 31191500 Base (B) - Billing Unit EA Base (B) - Customary Cubic Dimension 0.00061 IN3 Base (B) - Customary Gross Weight 0.00221 LB Base (B) - Customary Net Weight 0.00221 LB Base (B) - Metric Net Weight 0.001 KG Base (B) - Metric Cubic Dimension 0.01 CCM Base (B) - Item Quantity 1 Base (B) - Unit EA Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Item Quantity 0 Pallet (8) - Item Quantity 0