Main Picture
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H, Tan, 13 in x 36 yd, 20 mil, Roll
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H, Tan, 13 in x 36 yd, 20 mil, Roll
3M ID 7100367186 SAP ID 7100367186 Legacy SKU UU013531866 Product Number E1120H Base SKU B40067224 Keywords 3M, 3M Cushion-Mount Plus Plate Mounting Tape, flexographic printing, flexographic print plates, mounting tape, double coated foam tape, air release feature, plate side adhesive, edge lifting resistance, photopolymer plate, print sleeve, steel cylinder, print conditions, adhesive residue, cushioned flexographic plate mounting, bubble-free mounting, process printing, sticky back foam tape, wide-web presses, film printing, paper printing, flexible packaging industry, acrylic adhesives, tight print registration, high speed print runs, reduced air entrapment, crosshatched pattern, easy mount adhesive, printing quality, printing productivity, commercial solutions, manufacturing, appliance, bonding & assembly, building maintenance & repair, defense, paper & print. Brand Cushion-Mount™ Global Product Hierarchy Flexographic Plate Mounting Tapes Commodity 2660 - Flexographic & Splicing Tapes Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00638060553770 Marketplace Formal Name 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H, Tan, 13 in x 36 yd, 20 mil, Roll Material Description E1120H PLUS PLT MTG TAPE TN 13INX36YD Marketplace Description 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This tan foam mounting tape provides high quality process print. Marketplace Description Extended Bubble Free Flexographic Plate Mounting 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H is a tan foam tape that provides high quality process print. It has the air release feature that allows for bubble free mounting. This tape has excellent resistance to lifting on press allowing for clean plate removal. Recommended Applications • Mounting photopolymer plates to flexographic printing cylinders and sleeves • Used in process printing • 3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry 3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs. This cushion tape is manufactured for 20 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting. On Easy with Reduced Air Entrapment 3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting. Keep the Presses Running and your Customers Coming Back For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. Bullets - 0.020 inch (0.51 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to resist edge lifting on flexographic print plates
- Cushioned flexographic plate mounting sticky back foam tape
- Flexographic printing, flexographic printers
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
- Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
- Plate demounts from the double coated cushioned tape without adhesive residue
- Print plates mounted on E1120H will have no air bubbles under the plate due to the air release feature designed into the tape
- Provides high quality process with halftone dots
- Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
- Tan foam color indicates the process printing density foam
- Tape also removes cleanly from the sleeve or steel print cylinder
Adhesive Type Differential Acrylate Application Flexographic Plate Mounting Application Thickness (Imperial) 20 mil Application Thickness (Metric) 0.508 mm Backing Material Polyethylene Foam Overall Width (Imperial) 13 in Primary Liner Polycoated Polyester Primary Liner Thickness (Imperial) 4.5 mil Primary Liner Thickness (Metric) 0.11 mm Product Color Tan Sales unit ROL SAP Shelf Life In Days 730 Target Warehouse Location Lead Time 18 SAP External Material Group 31201500 Base (B) - Billing Unit ROL Base (B) - Customary Cubic Dimension 735.64411 IN3 Base (B) - Customary Gross Weight 8.7318 LB Base (B) - Customary Net Weight 8.7318 LB Base (B) - Metric Net Weight 3.96 KG Base (B) - Metric Cubic Dimension 12055.0 CCM Base (B) - Item Quantity 1 Base (B) - Unit ROL Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Item Quantity 0 Pallet (8) - Item Quantity 0