Main Picture
3M™ Cushion-Mount™ Plus Plate Mounting Tape L1320, Yellow, 13 in x 36 yd, 20 mil, Roll
3M™ Cushion-Mount™ Plus Plate Mounting Tape L1320, Yellow, 13 in x 36 yd, 20 mil, Roll
3M ID 7100368353 SAP ID 7100368353 Legacy SKU UU013551054 Product Number L1320 Base SKU B40067260 Keywords 3M, Cushion-Mount Plus Plate Mounting Tape, flexographic print plates, sticky back foam tape, medium soft density foam, yellow foam tape, air release feature, print sleeve mounting, steel cylinder mounting, flexographic photopolymer plate, plate edge lifting, easy plate removal, reduced air entrapment, bubble free mounting, acrylic adhesives, cross-hatch pattern, print quality, high speed print runs, commercial solutions, manufacturing, appliance bonding, building maintenance, paper and print industry, flexographic mounting systems, printing combinations, solid printing processes, halftone dots, wide-web presses, flexible packaging industry, engineered adhesives, tight caliper tolerance, compressible foam, printing plants, paper web splicing, packaging solutions. Brand Cushion-Mount™ Global Product Hierarchy Flexographic Plate Mounting Tapes Commodity 2660 - Flexographic & Splicing Tapes Extended Intended Use Disclaimer 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. Intended Use Disclaimer For industrial/occupational use only. Not for consumer sale or use. Base (B) - Article Number 00638060553848 Marketplace Formal Name 3M™ Cushion-Mount™ Plus Plate Mounting Tape L1320, Yellow, 13 in x 36 yd, 20 mil, Roll Material Description L1320 PLUS PLT MTG TAPE YL 13INX36YD Marketplace Description 3M™ Cushion-Mount™ Plus Plate Mounting Tape L1320 with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This yellow plate mounting sticky back foam tape provides high quality medium soft combination print. Marketplace Description Extended Bubble Free Flexographic Plate Mounting An air release feature with plate side adhesive technology allows 3M™ Cushion-Mount™ Plus Plate Mounting Tape L1320 to remove with less force in the presence of ink contaminates on flexographic print plates. This 0.020 inch (0.51 mm) double coated medium soft density yellow foam tape is ideal for high quality medium soft combination print and securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing. Notably, this flexographic plate mounting tape has excellent resistance to lifting on press and is tolerant to ink contaminates, allowing for easy and clean plate removal. Recommended Applications Mounting photopolymer plates to flexographic printing cylinders and sleeves Used in combination, process and solid printing processes 3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry 3M™ Cushion-Mount™ Plus Plate Mounting Tape L1320 is constructed with engineered acrylic adhesives for 20 mil applications. The adhesive on the linered (plate) side of the tape is designed for mounting photopolymer plates. Easy plate removal from tape may result in less worker fatigue and plate damage. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting. On Easy with Reduced Air Entrapment Unlike flat or pebbled liners, E-Series liners are crosshatched. This imprints unique microchannels into the adhesive that allow air to flow throughout the adhesive. Air bubbles disappear from between the tape and plate, and between the tape and cylinder or sleeve for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting. Understanding Flexographic Plate Mounting Tapes 3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow flexographic printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs. Keep the Presses Running and your Customers Coming Back For decades, 3M products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on 3M for solutions and service throughout your operation. Click here for more information on Flexographic Mounting Systems Bullets - 0.020 inch (0.51 mm) double coated medium soft density yellow foam tape
- Air release feature allows air to escape from between the tape and cylinder/sleeve and between tape and plate
- Designed to be easily removed from ink contaminated print plates
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
- Ideal for printing combinations of solids and process with halftone dots
- Plate easily demounts from the double coated cushioned tape without adhesive residue
- Securely bonds flexographic photopolymer plate to print sleeve or steel cylinder to prevent plate edge lifting during printing
- Yellow foam color indicates the medium soft density foam
Adhesive Type Differential Acrylate Application Flexographic Plate Mounting Application Thickness (Imperial) 20 mil Application Thickness (Metric) 0.5 mm Backing Material Polyethylene Foam Overall Width (Imperial) 13 in Overall Width (Metric) 330.2 mm Primary Liner Polycoated Polyester Primary Liner Thickness (Imperial) 4.5 mil Primary Liner Thickness (Metric) 0.11 mm Product Color Yellow Shelf Life 24 Month Sales unit ROL SAP Shelf Life In Days 730 Target Warehouse Location Lead Time 18 SAP External Material Group 31201500 Base (B) - Billing Unit ROL Base (B) - Customary Cubic Dimension 735.64411 IN3 Base (B) - Customary Gross Weight 9.71303 LB Base (B) - Customary Net Weight 9.71303 LB Base (B) - Metric Net Weight 4.405 KG Base (B) - Metric Cubic Dimension 12055.0 CCM Base (B) - Item Quantity 1 Base (B) - Unit ROL Consumer (2) - Item Quantity 0 Inner (3) - Item Quantity 0 Shipper (6) - Item Quantity 0 Pallet (8) - Item Quantity 0