Sheathing Tape
Image_HighDownload

SHEATHING

Sheathing Tape

Sheathing Tape is a BOPP film tape with aggressive acrylic adhesive. Designed and engineered primarily for permanent seaming and sealing of joints in foam insulation and other sheathing materials, to secure lap edges in house wraps and other vapor barriers, repair rips and tears in roll and batt insulation, construction films and membranes. Eliminates drafts around window and door openings.

  • Multi-Purpose Construction tape to prevent air infiltration, provide vapor barrier protection, and enhance appearance. Surfaces to be clean/dry. Do NOT apply to wet surfaces (facing or wood). May be hand or machine applied. Lap intersecting joined tapes a minimum of 50.8 mm (2”). Tape should be centered over the joint or other area to be scaled.
  • SubClassDescriptionSHEATHING
    StyleSHEATHING
    SKU85518
    ColorWHITE
    UnitWidth48
    UnitWidthUOMMM
    UnitLength50
    UnitLengthUOMM
    UnitWeight(lbs)0.545
    StandardUOMRL
    RollsPerCase24
    CasesPerPallet64
    CommodityCodeSTCK
    CountryOfOriginCA
    ItemUPC00077922855186
    CaseUPC50077922855181
  • Backing Material1.6 mil (40µm) BOPP
    Adhesion to Steel (oz/in of width)40
    Elongation (% at break)120
    Tensile (lb/in of width)30
    Thickness (mil)3
    Color(s)Red, White
  • Marketing Short DescriptionSheathing Tape, 1.88" x 54.6 yd, White (Single Roll)
    Marketing Long DescriptionSheathing Tape is a BOPP film tape with aggressive acrylic adhesive. Designed and engineered primarily for permanent seaming and sealing of joints in foam insulation and other sheathing materials, to secure lap edges in house wraps and other vapor barriers, repair rips and tears in roll and batt insulation, construction films and membranes. Eliminates drafts around window and door openings.
    Product ApplicationMulti-Purpose Construction tape to prevent air infiltration, provide vapor barrier protection, and enhance appearance. Surfaces to be clean/dry. Do NOT apply to wet surfaces (facing or wood). May be hand or machine applied. Lap intersecting joined tapes a minimum of 50.8 mm (2”). Tape should be centered over the joint or other area to be scaled.